Surface finishing

SPIRATRON vibration deburring – deburring with ceramic bodies

Suitable for smaller parts

Tumbling takes place in a tumbling machine, where metal components, together with the tumbling medium (ceramic abrasive bodies), move and the surface is mechanically treated. The movement is ensured by vibrations.

Sanding belt width - 1300mm
Deburring and brushing units

Min. workpiece thickness - 0.5mm

Max. workpiece thickness - 160mm

combination table:
1. magnet
2. vacuum

4 separate and combinable grinding stations:

1. grinding unit with sanding belt
   sands burrs protruding above the surface of the material
   removes scale and corrosion from the surface (coarse grain)
2. grinding unit with sanding belt
   sands burrs protruding above the surface of the material
   removes scale and corrosion from the surface (fine grain)
3. disk brushing unit
   with lamellar or other brushes - rounds off sharp edges after grinding
4. brushing unit made of sanding fleece
   cleans and pre-polishes the surface

Touch control panel operation

The BSM 1300 RRDB deburring and beveling machine (including Standard VI dust removal device) is co-financed within the project "Development of the technological portfolio" of the Operational Program: Entrepreneurship and Innovation (OPPI): Development - Call III